| CONTACT DETAILS |
Physical Address: Tel: (032) 459 2383 STM Tanks Physical Address: Tel: (012) 719 9052/3/4 Associated Company Grotto Defranceschi - manufacturers of stainless steel wine, fruit & beverage and dairy tanks.
|
 |
| OUR MISSION |
|
- NUPI Piping and Fittings
- OCIO Level Monitoring System
- Quantum V2 Fixed Speed Submersible
- Sumps and Spill Containers
Forgeweld offers a range of quality tank ancillary equipment, including:
Manhole and Frame - this strong university-tested design consists of a cast iron frame and a lid fabricated from diaganolly woven fibreglass matting and can withstand a pin pressure of twelve tonnes.
SAM1 Piston Pump - this compact and cost-effective hand pump is constructed from lightweight aluminium and is fitted with a replaceable stainless steel liner which provides the piston with a corrosion-resistant surface on which to operate. The pump's modern design offers the following features:
- Teflon impregnated Keviar packing;
- Nozzle boot and barrel bung directly into body of pumps;
- The body has a 1" inlet and ¾" outlet;
- High vacuum ensures self-priming;
- High capacity of 20 gallons (76 litres) per 100 strokes
- Flow can be reversed by removing the pin and rotating the piston through 180°
- The pump can be disassembled easily without disturbing piping to clean the strainer or to service it by removing the cover and pulling out the piston
- The SAM1 Piston Pump can be provided with an accurate, cost-effective nutating disc flow metre which shows delivery accurately to 1/10 of a gallon up to 100 gallons (379 litres) and cumulative use up to 100 000 gallons (378 541litres)
- SAM1Piston Pumps are compatible with a wide variety of liquids including gasoline, oils and solvents
- Underwriters Laboratory listed models are available to meet OSHA requirements
K33 Flowmeter - the K33 Flowmeter is a nutating disc metre designed to measure quantities of dispensed fuel or lubricant. This reliable, cost-effective meter consists of an aluminium metering chamber and polybutylene nutating disc with an aligned 1" G inlet and outlet and mechanical readout device with rotating wheels. It is easy to install and calibrate (subtotals can be reset) and offers four different flow configurations. The K33 Flowmeter is available in litre and gallon units with 3-digit subtotals and 6-digit totals.
- Flow rate: 20-120 litres/minute
- Precision: +1% of flow range after calibration
- Maximum operating pressure: 10 bars (Bursting Pressure: 30 bars)
- Resolution: 0.1 litres
FXV Leak Detector - FXV Leak Detectors are built to provide superior performance. They offer a variety of tests, including the fastest line test for hourly monitoring available, without interrupting business at the fuel dispenset or spilling product - simply snap the FX tester onto the FX2V with the convenient snap tap connectors. FXV leak detectors are Underwriters Laboratory listed and third party certified to guarantee performance and durability.
- Two models available - the FX1V and its successor the FX2V
- Constructed from advanced materials
- Easy to install and troubleshoot - no special wrenches nor maintenance tools required
- Increased static head capability and reduced nuisance tripping
- Guaranteed for 24 months from the manufacturing date to detect at a rate of 3gph (11.41ph) at 10psi (69kpa)
- Fast test time enables operation in areas of extreme temparature variability
- Can be adapted to applications using high-resilience lines, e.g. NUPI flexible piping
- Designed to handle up to 3.4m (11ft) of static-head, facilitating performance at sites with a significant gradient between tank and dispenser
- Compatible with a wide variety of fuels including diesel
